Kiboko Hi Cover Emulsion Paint is based on Acrylic Copolymer, high quality pigments, extenders and special additives.
Kiboko Hi Cover Emulsion is recommended for use on Concrete, Plaster, Cement, Brickwork and Stucco Surfaces. It Offers Durability and Toughness.
4 Litre , 20 Litre
As per the shade-card of Kiboko Paint Ltd and special shade on request.
|Surface Dry:||15 To 20 Minutes|
|Hard Dry:||3 To 4 Hours|
|Recoating:||After 4 Hours|
|Spreading Capacity:||10 To 12 square meter per Litre|
|Surface Preparation:||Allow new cement/plaster surface to dry sufficiently to escape moisture before an application of Paint to avoid patches or film failure from the surface.
On the dry surface, remove any loose/flaking material and then apply Hi Cover Emulsion Paint.
If surface shows damp characteristics, use alkali resisting primer, and then apply Hi Cover Emulsion Paint.
|Thinning:||Thin Kiboko Hi Cover Emulsion Paint with 10 to 20% water depending on porosity of surface.|
|Application Tool:||Brush or Roller|
|Cleaning Of Application Tool:||Use Water|
|Precaution:||The Content should be stirred well before use.|